Our smallest industrial unit is weighing only 6000 kg and can produce 100,000 liters per 24 hours of high quality potable water without an electricity plug or generator but solely from a solar panel with a battery for storage. The modules can be attached in a plant and by this increase output. There is no limit!
perfect for clearing artesian and fossil wells as well as rivers by solar power, hydroelectric power float (on rivers) or microgasturbine all of which we provide as well.
The application for the new flagship product from ArtAqua is in the field of industry. Wherever pure water is required in large amounts, such as in large bakeries, beverage plants, breweries, pasta producers, hotels, large restaurants or laundries, the ArtAqua 111-00 is the right solution. With dimensions of 360 cm x 280 cm x 220 cm (W / D / H) and a maximum capacity of 100,000 litres in 24 hours, an excellent performance size ratio is again achieved.
Our technology does not require any chloride for keeping water fresh for up to 180 days because of the added anti-bacterial minerals.
Read here about the ‘Death-Motor’ Chlorine.
The ArtAqua 111-00 is a modular water treatment system with three high-performance modules. Each module has an axial piston pump with a maximum working pressure of 60 bar at 48 litres / minute and three high-performance membranes, each with a production rate of up to 33,000 litres / 24 hours, which includes about 99,000 litres / 24 h for each of the three modules.
Our technnology is being used in Chernobyl and Fukushima as it is the only one proven to decontaminate water by 99.2% from nuclear substances such as Caesium 134 and Tritium
For this purpose, each module uses two pre-filter units and three energising modules (HE) working in parallel. Control technology, including a Programmable Logic Controller (PLC), as well as pressure and system performance monitor, are also installed in each module. Each module also has a TDS tester, which constantly monitors the temperature and conductivity in µS or ppm. The ArtAqua 111-00 impresses with a water ratio of 1:1 or even as high as 1:0.8 of ultra-pure water (permeate) to waste water (concentrate). With a filtration rate from 95 to 98.9 percent and a high flow rate, the high requirements of different sectors can still be met in the industry.
Each module operates independently and therefore operates autonomously within the system itself. Maintenance, such as filter changes, can be carried out during operation, since only the corresponding module is removed from service. Easy access via the front also makes the maintenance simple and quick. The signalling of necessary maintenance is performed optically. For safety at work, an earth-protective circuit-breaker is installed. To perform the legally prescribed or self-determined quality control of the water sufficiently, at any time and very easily, water samples can be taken directly from each module through the installed stainless steel tap. Although each module operates autonomously, the entire system is operated by a central control system.
The “Water-in-the-Desert” – Program also serves the purpose of producing energy and fighting climate change efficiently.
|Height x Width x Depth||4.400 mm, 5.200 mm, 4.000 mm|
|Weight without water||approx. 6000 kg|
|Water consumption||approx. 60 – 70 l / min. at full power|
|Water connection||according to the arrangement|
|Waste water connection||according to the arrangement|
|Water production within 24 hours||max. 100,000 l|
|Filtration rate||95 % – 98.9 %|
|Pure water sewage ratio||1:1 – 0.8|
RRP: 149,995 US$ (excl. VAT) contact: email@example.com
A smaller unit, ArtAqua 111-36, processing 36,000 liters per 24h is available for 74,995 US$(excl. VAT)
solar panel and battery @ 495 US$(incl. VAT) each
Art Aqua is a proud member of the UN global compact